ExpressPod Button Changes

Scenario

You wish to change the ExpressPod lid from smileys to multiple-choice, or vice versa.

Before you start

  • This procedure will expose the ExpressPod circuitry. Please take precautions to avoid a static discharge which could damage the ExpressPod.

Changing your ExpressPod button panel

For ExpressPod EP-02 Models

  1. Remove the ExpressPod question panel.
  2. Separate the ExpressPod from the stand.
  3. Turn your ExpressPod upside down on to a flat surface.
  4. You will see two small phillips screws. Remove these.
  5. You will see four plastic tabs. Push these inwards and you will be able to push the button panel up off the ExpressPod.
  6. Swap the panel for your desired alternative by ensuring the tabs click back into place. Remember to replace the two screws.
  7. Reattach the stand and question panel.

For ExpressPod EP-01 Models

  1. Remove the ExpressPod question panel.
  2. Separate the ExpressPod from the stand.
  3. Turn your ExpressPod upside down on to a flat surface.
  4. You will see four phillips screws. Unscrew these.
  5. Turn your ExpressPod the right way up and swap the lid for your desired alternative.
  6. Reattach the stand and question panel.